EN 10216-1/2/3/4 seamless tubes are high-performance tubes that meet stringent European standards in pressure applications. Manufactured with precision techniques, they find significant application in areas where strength, endurance, and corrosion protection are very important. Meta Aerospace provides high-grade EN 10216 seamless tubes that meet all EN 10216 standards.

Table of Content

blog

What are EN 10216-1/2/3/4 Seamless Steel Tube?

EN 10216-1/2/3/4 seamless tubes come in four categories with varied uses. EN 10216-1 contains non-alloy steel tubes in pressure and general-purpose applications. EN 10216-2 classifies tubes with high-temperature resistant alloy steel. EN 10216-3 considers fine-grain tubes with high toughness. EN 10216-4 contains seamless tubes with low-temperature uses. The tubes have extensive use in a range of sectors where high-pressure dependability is needed.

❝

EN 10216-1/2/3/4 Seamless Steel Tube, EN 10216-1/2/3/4 Seamless Steel Tube Manufacturers, EN 10216-1/2/3/4 Seamless Steel Tube Suppliers, EN 10216-1/2/3/4 Seamless Steel Tube Stockists, EN 10216-1/2/3/4 Seamless Steel Tube Exporters

❞

Advantages of EN 10216-1/2/3/4 Seamless Steel Tube?

The advantages of EN 10216-1/2/3/4 seamless tubes include increased strength, high internal and external pressure resistance, and high thermal stability. The seamless design minimizes weak points to a bare minimum, minimizing the chances of failure under stress. The tubes possess better corrosion resistance, longer service life, and improved performance in severe conditions. Meta Aerospace conducts strict quality control in manufacturing to ensure the tubes are dependable and consistent in high-performance uses.

Uses and Applications EN 10216-1/2/3/4 Seamless Steel Tube?

EN 10216-1/2/3/4 high-tensile strength seamless tubes have wide application in demanding markets. The oil and gas market employs such tubes to convey high-pressure fluids in an efficient and safe manner. The tubes have application in the power generation market in the form of boilers and heat exchangers where thermal and pressure resistant applications are required. The petrochemical market employs the tubes in processing where corrosion resistant applications are required. Aerospace and defense markets employ the tubes in structural and hydraulic systems where such tubes have application. The automobile market employs the tubes in fuel and exhaust systems where thermal and pressure resistant applications are required.

❝

EN 10216-1/2/3/4 Seamless Steel Tube in India, EN 10216-1/2/3/4 Seamless Steel Tube Manufacturers in India, EN 10216-1/2/3/4 Seamless Steel Tube Suppliers in India, EN 10216-1/2/3/4 Seamless Steel Tube Stockists in India, EN 10216-1/2/3/4 Seamless Steel Tube Exporters in India

❞

Meta Aerospace is one of the leading EN 10216-1/2/3/4 Seamless Steel Tube Manufacturers committed to providing high-performance tubes with guaranteed quality. We manufacture tubes with international standards to ensure dimensional accuracy, corrosion protection, and mechanical strength. As one of the most dependable EN 10216-1/2/3/4 Seamless Steel Tube Suppliers, Meta Aerospace delivers on time and offers a safe supply chain. We possess a massive inventory with tubes in varying dimensions and grades to serve the needs of various industries.

❝

EN 10216-1/2/3/4 Seamless Steel Tube in Mumbai, EN 10216-1/2/3/4 Seamless Steel Tube Manufacturers in Mumbai, EN 10216-1/2/3/4 Seamless Steel Tube Suppliers in Mumbai, EN 10216-1/2/3/4 Seamless Steel Tube Stockists in Mumbai, EN 10216-1/2/3/4 Seamless Steel Tube Exporters in Mumbai

❞

Meta Aerospace is a reliable EN 10216-1/2/3/4 Seamless Steel Tube Stockists with an extensive stock of high quality tubes to meet urgent project requirements. We possess an efficient warehousing and delivery system to provide immediate delivery and satisfaction to the client. Meta Aerospace is among the most trustworthy EN 10216-1/2/3/4 Seamless Steel Tube Exporters supplying to international clients and delivering quality tubes to nations all over the world. Our export activities ensure international standards and client requirements.

What Are Specification EN 10216-1/2/3/4 Seamless Steel Tube?

Standard AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe
Steel En 10216 Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
En 10216 Material Welded Pipe Size 5.0 mm – 1219.2 mm
EN 10216-1 Grade P235TR1 Alloy Steel EFW Pipe size 5.0 mm – 1219.2 mm
Bs EN 10216-2 Grade P265GH Alloy Steel Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
P355nl1 En 10216-3 Pipe Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Alloy Steel EN 10216-1 Grade P265TR1 Seamless Tube Size 3.35 mm OD To 101.6 mm OD
Bs EN 10216-2 Grade P265GH Alloy Steel Welded Tube Size 6.35 mm OD To 152 mm OD
EN 10216-1 Grade P235TR1 Tubes Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
EN 10216-4 Grade P215NL Alloy Steel Tube wall thickness 0.020" –0.220", (special wall thicknesses available)
EN 10216-2 Grade P235GH Alloy Steel Length Single Random, Double Random, Standard & Cut length Pipe & Tube
En P265nl Grade 10216-4 Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
AS Grade X11CrMo5+NT1 Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
En 10216 Material Type Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc
Alloy Steel En 10216-5 Pipe End Plain End, Beveled End, Treaded Pipe & Tube
Steel En 10216 Marking All EN 10216-2 Grade P235GH Seamless Steel Tube are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Alloy Steel EN 10216-2 Grade P235GH Tubes Application Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube
EN 10216-1 Grade P235TR1 Alloy Steel Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
EN 10216-3 Grade P275NL2 Alloy Steel Specialize in
  • EN 10216-4 Grade P215NL Alloy Steel Large Diameter Pipe
  • Alloy Steel En 10216-5 Capillary Tube
  • EN 10216-2 Grade P265GH Tubes Heat Exchanger
  • Astm A312 En 10216-5 Condenser Tube
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report,
Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts,
AS Grade X11CrMo5+NT1 Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP)
Manufacturers of Alloy Steel EN 10216-2 Grade P235GH Pipe
  • Kobe Special Tube, Japan
  • Sumitomo Metals, Japan
  • Nippon Steel Corporation, Japan
  • Sanyo Special Steel, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller Bleckmann, Austria
  • Seah Steel Corporation, Korea
We can also cut, thread, and groove EN 10216-2 Grade P235GH Alloy Steel Pipe to meet your specifications. Pipe Dimension ANSI/ ASME B36.19, B36.10, B2.1

Equivalent material Of EN 10216-1/2/3/4 Seamless Steel Tube?

Products DIN En BS NFA ASTM ASME
EN 10216-1 Grade P195TR1 – EN 10216-1 Grade P195TR1 – – – –
EN 10216-1 Grade P195TR2 – EN 10216-1 Grade P195TR2 – – – –
EN 10216-1 Grade P235TR1  – EN 10216-1 Grade P235TR1 – – – –
EN 10216-1 Grade P235TR2 – EN 10216-1 Grade P235TR2 – – – –
EN 10216-1 Grade P265TR1 – EN 10216-1 Grade P265TR1 – – – –
EN 10216-1 Grade P265TR2 – EN 10216-1 Grade P265TR2 – – – –
EN 10216-2 Grade X10CrMoVNb9-1  – EN 10216-2 Grade X10CrMoVNb9-1 – – – –
EN 10216-2 Grade P265GH – EN 10216-2 Grade P265GH – – – –
EN 10216-2 Grade 14MoV6-3 – EN 10216-2 Grade 14MoV6-3 – – – –
EN 10216-2 Grade 7CrWVMoNb9-6 – EN 10216-2 Grade 7CrWVMoNb9-6 – – – –
EN 10216-2 Grade 7CrMoVTiB10-10 – EN 10216-2 Grade 7CrMoVTiB10-10 – – – –
EN 10216-2 Grade 16Mo3 – EN 10216-2 Grade 16Mo3 – – – –
EN 10216-2 Grade 10CrMo5-5 – EN 10216-2 Grade 10CrMo5-5 – – – –
EN 10216-2 Grade 13CrMo4-5 – EN 10216-2 Grade 13CrMo4-5 – – – –
EN 10216-2 Grade 11CrMo9-10+QT – EN 10216-2 Grade 11CrMo9-10+QT – – – –
EN 10216-2 Grade 25CrMo4 DIN 17200 Grade 25CrMo4 EN 10216-2 Grade 25CrMo4 NFA EN . Grade 25CrMo4 – – –
EN 10216-2 Grade X11CrMo5+I – EN 10216-2 Grade X11CrMo5+I – – – –
EN 10216-2 Grade X11CrMo5+NT1 – EN 10216-2 Grade X11CrMo5+NT1 – – – –
EN 10216-2 Grade X11CrMo5+NT2 – EN 10216-2 Grade X11CrMo5+NT2 – – – –
EN 10216-2 Grade P195GH  – EN 10216-2 Grade P195GH – – – –
EN 10216-2 Grade P235GH – EN 10216-2 Grade P235GH – – – –
EN 10216-3 Grade P460NH DIN 17178/17179 Grade FGP 47 W EN 10216-3 Grade P460NH – – – –
EN 10216-3 Grade P460NL1 DIN 17178/17179 Grade FGP 47 T EN 10216-3 Grade P460NL1 – ASTM A 381 Grade Y 65 ASME SA 381 Grade Y 65 –
EN 10216-3 Grade P460NL2 DIN 17178/17179 Grade FGP 47 E EN 10216-3 Grade P460NL2 – – – –
EN 10216-3 Grade P275NL1 DIN 17179 Grade FGP 28 T EN 10216-3 Grade P275NL1 NFA A49-2452) Grade TS 42-BT ASTM A 662 Grade B ASME SA 662 Grade B –
EN 10216-3 Grade P275NL2 DIN 17179 Grade FGP 28 E EN 10216-3 Grade P275NL2 – ASTM A 707 Grade L2, Class 1 ASME SA 707 Grade L2, ClSAss 1 –
EN 10216-3 Grade P355N DIN 17179 Grade FGP 36 EN 10216-3 Grade P355N NFA A 49-326 Grade TU 52-BT ASTM A381 Grade Y 52 ASME SA381 Grade Y 52 –
EN 10216-3 Grade P355NH DIN 17179 Grade FGP 36 W EN 10216-3 Grade P355NH NFA A 36-2051) Grade A 52 FP ASTM A 662 Grade C ASME SA 662 Grade C –
EN 10216-3 Grade P355NL1 DIN 17179 Grade FGP 36 T EN 10216-3 Grade P355NL1 NFA A 36-2071) Grade A 510 FP 1 ASTM A 707 Grade L2,Class 2 ASME SA 707 Grade L2,ClSAss 2 –
EN 10216-3 Grade P355NL2 DIN 17179 Grade FGP 36 E EN 10216-3 Grade P355NL2 – – – –
EN 10216-3 Grade P460N DIN 17178/17179 Grade FGP 47 EN 10216-3 Grade P460N – ASTM A 225 Grade C ASME SA 225 Grade C –
EN 10216-4 Grade P215NL – EN 10216-4 Grade P215NL – – – –
EN 10216-4 Grade P265NL – EN 10216-4 Grade P265NL – – – –

Chemical Composition Of EN 10216-1/2/3/4 Seamless Steel Tube?

Products Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
EN 10216-1 Grade P195TR1 max 0.13 max 0.70 0.025 0.02 max 0.30 max 0.30 max 0.08 max 0.30 – V max 0.02 Ti max 0.04
EN 10216-1 Grade P195TR2 max 0.13 max 0.70 0.025 0.015 max 0.30 max 0.30 max 0.08 max 0.30 – V max 0.02 Ti max 0.04 Al min 0.02
EN 10216-1 Grade P235TR1  max 0.16 max 1.20 0.025 0.02 max 0.30 max 0.30 max 0.08 max 0.30 – V max 0.02 Ti max 0.04
EN 10216-1 Grade P235TR2 max 0.16 max 1.20 0.025 0.015 max 0.30 max 0.30 max 0.08 max 0.30 – V max 0.02 Ti max 0.04 Al min 0.02
EN 10216-1 Grade P265TR1 max 0.20 max 1.40 0.025 0.02 max 0.30 max 0.30 max 0.08 max 0.30 – V max 0.02 Ti max 0.04
EN 10216-1 Grade P265TR2 max 0.20 max 1.40 0.025 0.015 max 0.30 max 0.30 max 0.08 max 0.30 – V max 0.02 Ti max 0.04 Al min 0.02
EN 10216-2 Grade X10CrMoVNb9-1  0.08-0.12 0.20-0.50 0.30-0.60 0.02 0.005 0.85-1.05 max 0.40 8.00-9.00 max 0.30 V0.18-0.25 Nb0.06-0.10 N0.03-0.07
EN 10216-2 Grade P265GH max 0.20 max 0.40 max 1.40 0.025 0.01 max 0.08 max 0.30 max 0.30 max 0.30 V max 0.02 Ti max 0.04 Al min 0.020
EN 10216-2 Grade 14MoV6-3 0.10-0.18 0.10-0.35 0.40-0.70 0.025 0.01 0.50-0.70 – 0.30-0.60 – V0.22-0.28
EN 10216-2 Grade 7CrWVMoNb9-6 0.04-0.10 max 0.5 0.10-0.60 0.03 0.01 0.05-0.30 – 1.90-2.60 – W1.45-1.75 V0.20-0.30 Al max 0.030 Nb0.02-0.08
EN 10216-2 Grade 7CrMoVTiB10-10 0.05-0.10 0.15-0.45 0.30-0.70 0.02 0.01 0.90-1.10 – 2.20-2.60 – V0.02-0.03 Al max 0.020 B0.015-0.070 N max 0.010
EN 10216-2 Grade 16Mo3 0.12-0.20 0.15-0.35 0.40-0.90 0.025 0.01 0.25-0.35 – – – Al max 0.040
EN 10216-2 Grade 10CrMo5-5 max 0.15 0.50-1.00 0.30-0.60 0.025 0.01 0.45-0.65 max 0.30 1.00-1.50 max 0.30 Al max 0.040
EN 10216-2 Grade 13CrMo4-5 0.10-0.17 0.15-0.35 0.40-0.70 0.025 0.01 0.40-0.60 – 0.70-1.15 – Al max 0.040
EN 10216-2 Grade 11CrMo9-10+QT 0.08-0.15 max 0.5 0.40-0.80 0.025 0.01 0.90-1.10 max 0.30 2.0-2.5 max 0.30 Al max 0.040
EN 10216-2 Grade 25CrMo4 0.22-0.29 max 0.4 0.6-0.9 0.035 0.01 0.15-0.30 – 0.9-1.2 – –
EN 10216-2 Grade X11CrMo5+I 0.08-0.15 0.15-0.50 0.30-0.60 0.025 0.01 0.45-0.65 – 4.00-6.00 max 0.30 –
EN 10216-2 Grade X11CrMo5+NT1 0.08-0.15 0.15-0.50 0.30-0.60 0.025 0.01 0.45-0.65 – 4.00-6.00 max 0.30 –
EN 10216-2 Grade X11CrMo5+NT2 0.08-0.15 0.15-0.50 0.30-0.60 0.025 0.01 0.45-0.65 – 4.00-6.00 max 0.30 –
EN 10216-2 Grade P195GH  max 0.13 max 0.35 max 0.70 0.025 0.01 max 0.08 max 0.30 max 0.30 max 0.30 V max 0.02 Ti max 0.04 Al min 0.020
EN 10216-2 Grade P235GH max 0.16 max 0.35 max 1.20 0.025 0.01 max 0.08 max 0.30 max 0.30 max 0.30 V max 0.02 Ti max 0.04 Al min 0.020
EN 10216-3 Grade P460NH max 0.20 max 0.60 1.00-1.70 0.025 0.01 max 0.10 max 0.80 max 0.30 max 0.70 V max 0.20 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.22
EN 10216-3 Grade P460NL1 max 0.20 max 0.60 1.00-1.70 0.025 0.008 max 0.10 max 0.80 max 0.30 max 0.70 V max 0.20 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.22
EN 10216-3 Grade P460NL2 max 0.20 max 0.60 1.00-1.70 0.025 0.005 max 0.10 max 0.80 max 0.30 max 0.70 V max 0.20 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.22
EN 10216-3 Grade P275NL1 max 0.16 max 0.40 0.50-1.50 0.025 0.008 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.05 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.05
EN 10216-3 Grade P275NL2 max 0.16 max 0.40 0.50-1.50 0.025 0.005 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.05 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.05
EN 10216-3 Grade P355N max 0.20 max 0.50 0.90-1.70 0.025 0.02 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.10 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.12
EN 10216-3 Grade P355NH max 0.20 max 0.50 0.90-1.70 0.025 0.01 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.10 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.12
EN 10216-3 Grade P355NL1 max 0.18 max 0.50 0.90-1.70 0.025 0.008 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.10 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.12
EN 10216-3 Grade P355NL2 max 0.18 max 0.50 0.90-1.70 0.025 0.005 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.10 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.12
EN 10216-3 Grade P460N max 0.20 max 0.60 1.00-1.70 0.025 0.02 max 0.10 max 0.80 max 0.30 max 0.70 V max 0.20 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.22
EN 10216-4 Grade P215NL max 0.15 max 0.35 0.40-1.20 0.03 0.01 max 0.08 max 0.30 max 0.30 max 0.30 V max 0.020 Nb max 0.010 Ti max 0.040 Al min 0.020
EN 10216-4 Grade P265NL max 0.20 max 0.40 0.60-1.40 0.03 0.01 max 0.08 max 0.30 max 0.30 max 0.30 V max 0.020 Nb max 0.010 Ti max 0.040 Al min 0.020

Mechanical Properties Of EN 10216-1/2/3/4 Seamless Steel Tube?

Products Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
EN 10216-1 Grade P195TR1   320 440 – 27
EN 10216-1 Grade P195TR2   320 440 – 27
EN 10216-1 Grade P235TR1    360 500 – 25
EN 10216-1 Grade P235TR2   360 500 – 25
EN 10216-1 Grade P265TR1     410 570 – 21
EN 10216-1 Grade P265TR2     410 570 – 21
EN 10216-2 Grade X10CrMoVNb9-1      630 830 – 19
EN 10216-2 Grade P265GH     410 570 – 23
EN 10216-2 Grade 14MoV6-3     460 610 – 20
EN 10216-2 Grade 7CrWVMoNb9-6     510 470 – 20
EN 10216-2 Grade 7CrMoVTiB10-10     565 840 – 17
EN 10216-2 Grade 16Mo3     450 600 – 22
EN 10216-2 Grade 10CrMo5-5     410 560 – 22
EN 10216-2 Grade 13CrMo4-5     440 590 – 22
EN 10216-2 Grade 11CrMo9-10+QT     540 680 – 20
EN 10216-2 Grade 25CrMo4     900 – – 12
EN 10216-2 Grade X11CrMo5+I     430 580 – 22
EN 10216-2 Grade X11CrMo5+NT1     480 640 – 20
EN 10216-2 Grade X11CrMo5+NT2     570 740 – 18
EN 10216-2 Grade P195GH      320 440 – 27
EN 10216-2 Grade P235GH     360 500 – 25
EN 10216-3 Grade P460NH     560 730 – 19
EN 10216-3 Grade P460NL1     560 730 – 19
EN 10216-3 Grade P460NL2     560 730 – 19
EN 10216-3 Grade P275NL1     390 530 – 24
EN 10216-3 Grade P275NL2     390 530 – 24
EN 10216-3 Grade P355N     490 650 – 22
EN 10216-3 Grade P355NH     490 650 – 22
EN 10216-3 Grade P355NL1     490 650 – 22
EN 10216-3 Grade P355NL2     490 650 – 22
EN 10216-3 Grade P460N     560 730 – 19
EN 10216-4 Grade P215NL     360 480 – 25
EN 10216-4 Grade P265NL     410 570 – 24

People Also Search

EN 10216-1 Seamless Steel Tube Specifications, EN 10216-2 High-Temperature Alloy Tubes, EN 10216-3 Fine-Grain Seamless Tubes, EN 10216-4 Low-Temperature Seamless Tubes, Seamless Pressure Tubes, High Tensile Steel Tubes, Industrial Seamless Tubes, EN 10216 Tubing for Power Plants, EN 10216 Pipes for Oil and Gas, EN 10216 Structural Tubes, Seamless Steel Tube Manufacturers India, High-Pressure Steel Tube Suppliers, EN 10216 Tubes for Petrochemical Industry, Boiler and Heat Exchanger Tubes, Aerospace Hydraulic Tubes, EN 10216 Precision Steel Tubes, EN 10216 Seamless Line Pipes, EN 10216 Non-Alloy Steel Tubes, EN 10216 Alloy Steel Tubes, EN 10216 Carbon Steel Tubes, Seamless Tubes for Defense Applications, Seamless Tubes for Automotive Systems, Corrosion-Resistant Seamless Tubes, Seamless Pipes for Hydraulic Systems, Seamless Pipes for Structural Applications, Seamless Tubes for Industrial Use, Seamless Steel Tubes with High Strength, High-Performance Seamless Steel Tubes, Seamless Tubes for Gas Processing Plants, Seamless Steel Tubes for Chemical Processing.

En Standards Pipes

Other Pipes

Contact Info

Get A Free Quote

Worldwide Suppliers
  • India
  • United States
  • Saudi Arabia
  • Kuwait
  • Singapore
  • Malaysia
  • UAE
  • Germany
  • Italy
  • China
  • UK
  • Canada
  • Iran
  • Thailand
  • South Korea
  • Turkey
  • Morocco
  • Costa Rica
  • Kazakhstan
  • Philippines
  • Egypt
  • Japan
  • Russia
  • Vietnam
  • Australia
  • Qatar
  • South Africa
  • Portugal
  • Oman
  • Jordan
  • Spain
  • Hong Kong
  • Netherlands
  • Indonesia
  • Mexico
  • Brazil
  • France
  • Taiwan
  • Nigeria
  • Bangladesh
  • Iraq
  • Ukraine
  • Poland
  • Romania
  • Cyprus
  • Angola
  • Colombia
  • Norway
  • Chile
  • Tobago
  • Greece
  • Czechia
  • Belgium
  • Sri Lanka
  • Myanmar
  • Venezuela